Oliso TG-1000 User Manual download pdf (Page 13)

trouble shooting guide

iron does not heat

PROBLEM THINGS TO CHECK SOLUTION

Lifters do not

come out

iron does not steam

iron leaks

iron is emitting a brown

or white substance

fabric selector is set to off

iron not plugged in correctly

auto shut-off system is activated

Auto-Lift switch set to off

iron not plugged in correctly

handle activated

iron is not hot enough

steam selector set to off

steam valve is clogged

Auto-Lift is off and iron is

horizontal

iron is not hot enough

steam burst button is overused

water hardness may be too high

Turn the fabric selector knob to a fabric setting.

Check to make sure the plug is fully plugged into the socket.

touch the handle.

Set the switch on the back of the iron to the on ( ) position.

Check to make sure the plug is fully plugged into the socket.

Move your hand away from the iron, and the Auto-Lift

System will raise the sole-plate.

The fabric selector must be set to the wool, cotton or linen

settings to produce constant steam.

Steam selector must be turned to a setting.

Move the steam selector from off ( ) to the max ( )

settings a few times to unclog.

When the Auto-Lift switch is set to off ( ), always store

the iron in the vertical position. We recommend turning on

the Auto-Lift system to store the iron.

Make sure the fabric selector knob is set to the cotton or

linen range to ensure proper steam production.

Allow 3 seconds between uses of the steam burst function.

Switch to either spring water or half tap/half distilled water

mixture. See the “water tank” page for more information.

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Oliso TG-1000 User Manual Page 13